2009-2010

1. Valmikanathan, O.P.; Vallury, S.; McCabe, T.; Park, S.J. and Atre, S.V. “Properties of SiC and AlN Feedstocks for The Powder Injection Molding of Thermal Management Devices,” Powder Injection Molding International, 2010, 4(3), pp. 64-70.

2. Bothara, M.; Atre, S.V.; Sudarshan, T.; Radhakrishnan, R.; Park, S.J.; and German, R.M. “Master Sintering Curve Analysis of Plasma Pressure Compacted Nanoscale SiC,” Metallurgical and Materials Transactions, 2010, 41, pp.3252-3261.

3. Laddha, S.; Wu, C.; Park, S.J.; Lee, S.; Ahn, S.; German, R.M.; and Atre, S.V. “Analysis of Macroscale Mold Filling Defects in Micro Powder Injection Molding,” International Journal of Powder Metallurgy, 2010, 46 (3), pp. 49-58.

4. Valmikanathan, O.P.; Atre, S.V.; Simonsen, J.; Park, S.J.; German, R.M.; and Vijayamohanan, K. “Thermal Stability of Pd/Polycarbonate Nanocomposites,” Journal of Applied Polymer Science, 2010, 118, pp. 3602-3611.

5. Park, S.J.; Ahn, S.; Kang, T.G.; Chung, S.T.; Kwon, Y.S.; Chung, S.; Kim, S.G.; Kim, S.; Atre, S.V.; Lee, S.; and German, R.M. “Computer Simulations in Powder Injection Molding,” International Journal of Powder Metallurgy, 2010, 46 (3), pp. 37-46.

6. Urval, R.; Wu, C.L.; Lee, S.; Atre, S.V.; Park, S.J.; and German, R.M. “Optimization of Process Conditions in Powder Injection Molding of Microsystem Components Part II: Secondary Parameters,” Powder Metallurgy, 2010, 53, pp. 71-81.

7. Laddha, S.G.; Wu, C.L., Lingam, G.K.; Simmons, K.; Vallury, S.; Lee, S.; Park, S.J.; German R.M.; Vilma, P.; Levenfeld, B.; Varez, A., and Atre, S.V.“Characterization of Alumina Feedstock with Polyacetal and Wax-Polymer Binder Systems for Micro Powder Injection Moulding,” Powder Injection Molding International, 2009, 3(3), pp. 64-70.

8. Ahn, S.; Park, S.J.; Lee, S.; Atre, S.V.; and German, R.M. “Mixing Simulation for Powder Injection Moulding Feedstock: Quantification By Mixing Entropy”Powder Injection Molding International, 2009, 3(2), pp. 59-62.

9. Bothara, M.; Vijay, P.; Atre, S.V.; Sudarshan, T.; Radhakrishnan, R.; Park, S.J.; and German, R.M. “Design of Experiment Approach for Sintering Study of Nanocrystalline SiC Fabricated Using Plasma Pressure Compaction,” Science of Sintering, 2009, 41, pp. 125-133.

10. Ahn, S.; Park, S.J.; Lee, S.; Atre, S.V.; and German, R.M. “Effect of Powders and Binders on Material Properties and Molding Parameters in Iron and Stainless Steel Powder Injection Molding Process,” Powder Technology, 2009, 193, pp. 162-169.

11. Atre, S.V.; Jain, K.; Wu, C.L.; Kimura, S.; Sprenkle, V.; Jovanovic, G.; and Narayanan, V. “Synthesis of Silicon Nitride Nanoparticles in High Temperature Ceramic Microreactors,” International Journal of Applied Ceramic Technology, 2009, 6, pp. 410-419.